![]()
MC-WR11
router
next ›
‹ previous
ROUTERS
+ Description
| Wireless Router MC-WR11 working in the latest 802.11n standard provides increased wireless coverage and exceptional speed. Allows to triple data transfer speed (up to 150Mbps) comparing to 802.11g standard wireless devices. WPS technology (Wireless Protected Setup) allows rapid, easy and very intuitive configuration of the wireless network also enhancing safety even further. MC-WR11 Router supports all of the most advanced wireless encryption: WPA2 (802.11i), WPA, 802.1x,64/128-bit WEP. Configuration panel (accessible via Web browser) is very readable and user-friendly. Together with the MC-WR11 router, a Quick Start Guide is provided. Available in multiple languages. As well as a CD containing the extended User's manual describing the setup and use all the features of the device. | Key features:
|
+ Specification
| WAN: | Gateway / Bridge / WISP / Static IP / DHCP / PPPoE / IPsec / PPTP / L2TP / IPv6 / UPnP |
| LAN: | 4-port RJ45 switch / DHCP client, server / DHCP address reservation / |
| IP to MAC address assignment | |
| WLAN: | IEEE 802.11n support 1T1R |
| Up to 150Mbps | |
| Backward compatible with IEEE 802.11b/g standards | |
| Work Modes: Access Point (AP) / Client / WDS / AP+WDS / Universal Repeater (AP+Client) | |
| Advanced encryption: WPS; WPA2 (802.11i), WPA, WPA2/WPA Mixed, 802.11x | |
| 64/128-bit WEP encryption | |
| Quality of Service (QoS) support - WMM, WMM-PS | |
| Automatic wireless channel selection | |
| MAC address access control list (MAC address filter) | |
| Fragment Threshold / RTS Threshold / Beacon Interval | |
| Preamble Type: Long / Short | |
| IAPP - Roaming (802.11f) | |
| Protection / Aggregation / Short GI / WLAN Partition | |
| RF Output Power control | |
| DynDNS: | DynDNS.org / TZO |
| NAT: | NAT/NAPT IP sharing / DMZ / Port Forwarding / Port Trigger / UPnP |
| QoS: | Yes - IP (single or range) Grant MIN or MAX bandwidth |
| Firewall: | Ping Access on WAN / IGMP Proxy / Web Server Access on WAN / IPsec/PPTP/L2TP VNP pass through |
| Src MAC or IP Filter / URL Filter / Dst IP and Port Filter | |
| DoS Prevention: | |
| Whole System Flood: SYN, FIN, UDP, ICMP | |
| Per-Source IP Flood: SYN, FIN, UDP, ICMP | |
| TCP/UDP Port Scan (High/Low Sensitivity) | |
| ICMP Smurf, IP Land, IP Spoof, IP TearDrop, PingOfDeath, TCP Scan, TCP SynWithData, UDP Bomb, UDP EchoChargen Source IP Blocking (Block for a specified time) | |
| Management: | Access Schedule / NTP support / FW Upgrade / Save/Load Config / Reboot / User name and password management |
+ Support
